Stock Management Systems - RME Engineering

Go to content

Stock Management Systems

Engineering Products
RME - Stock Management and Handling Engineering - Gattle, Sheep and Horses
Our stock management and handling, engineering services offers the opportunity for custom made products to your requirements along with the more standard products as per below:

Products:  click on images below to enlarge and to see other views/options of the product
Cattle Crush With head Bail

Cattle crush with vet access gates on both sides, split gates on both sides for access to cattle, sliding rear gate. Load bar plates for bolting load bars to. Made from duragalv RHS steel and cattle rail. 3150 mm long and 750 mm wide inside. Can be made any length to suit your space. Auto head bail on front, but can fit any other type of head bail. Made to order.


Cattle Crush With Your Head Bail

Cattle crush made using your existing head bail. You send me your head bail and I will mount it to this crush. Full gates on both sides for three way drafting. Right side gate has a handle so it can be opened from the left side. Sliding rear gate. Vet gates can be added at a extra cost. Can be made any length to suit your yards. This is a left operating crush, but can make them so it is a right side operating. Load bar plates for bolting load bars to. Made from duragalv RHS steel and cattle rail and welds painted with silver zinc paint. Made to order.


Cattle Race With Sliding Gates

Cattle race with a sliding gate at each end. Race is 6100 mm long and 750 mm wide inside. Made from 115 mm by 42 mm cattle rail. All steel is duragalv with welds painted with silver zinc paint. Ready to be bolted down to concrete. A walk way could be added.


Portable Cattle Loading Ramp

Newly built portable cattle loading ramp for cattle. Can be towed to site and then lowered to the ground for use, by a winch. Drawbar slides in out of the way of truck and trailer wheels. Has a gate at top to close off the loading ramp, and also to let the truck driver into the back of the truck. Has a walk way up the side for the truck driver. Made from duragalv steel, with welds painted with silver zinc paint. Side rails are made from cattle rail with oval corners to prevent bruising. All new steel, timber, hubs and stubs and wheels. Made to order. Can build it with out the wheels, drawbar, and lifting system.


Fixed Cattle Loading Ramp

Double Deck Cattle ramp for loading cattle onto trucks. Has fold up galvanised flaps that create to the upper deck ramp. Made from duragalv steel with all welds painted with silver zinc paint. Has side gates that shut across the race to stop cattle so the driver can get in and out of the stock crate. Has a steel walkway with hand rail up to upper deck. Site excavation and concrete costs on top of the purchase price. Delivery costs may vary.


Cattle Yards

Small set of cattle yards with two pens and a race with a head bail at front. This set has two gates and 9 panels and the race. Yards can be made bigger by adding more panels. Can be set up in any configuration. Cattle yards made out of cattle rail to stop bruising. The rails are 1700 mm high. The race is 4000 metres long but can make them any length. The steel has a duragalv coating on it. Welds are painted with zinc paint


Head Bail

Head bail for cattle. 1500 mm high and 725 mm wide, plus hinges. Can be made the other way around, so it can be worked from the other side of the race, or any width to suit any size race.


Three Way Drafter

Three way drafter for cattle races. Can fit in a race or after a weigh crate. Can be made any width to suit races. Made from duragalv steel and welds painted with silver zinc paint.


Sliding Cattle Gate

Sliding gate for cattle race. Made to order. Can be made any width to suit races. Made from duragalv steel and welds painted with silver zinc paint.


Cattle Race Gates

Cattle race gates and rear sliding gate. Made out of 50 x 50 RHS and oval cattle rail. This set up is so you can cut out a section of your old wooden race and fit this to give you a steel side to your race with a side drafting gate and a vet access gate and rear sliding gate. Steel panel at bottom of the gates so cows feet can't kick out. Can make them any length. Welds are painted with zinc paint. Can arrange freight.


Cattle Yard Panel

Cattle yard panel made out of cattle rail to stop bruising. This panel is 1750mm high and 2135mm long. By adding more panels you can make up a set of cattle yards. The steel has a duragalv coating on it. Welds are painted with zinc paint. Can arrange freight.


Horse Yard Gate

Horse yard gate. Made to any length which will vary the price, so please ask before you buy to get a price for the length you need. Made from duragalv steel with the welds painted with silver zinc paint. Two versions either the two rail or the three rail.


Sheep Yard Gate

Sheep yard gate made from duragalv steel, and welds painted with silver galv paint. Up rights are 40 mm X 40 mm RHS steel and bars are 50 mm X 25 mm RHS.
This gate has 2 metre long bars, so gate is 2080 mm long plus hinges, but can be made any length, to replace a existing gate, or a new gate. Gates shorter than 2 metres don't have centre upright. Can make any amounts, or a complete set of sheep yards. 20 mm lugs for hinges. These can also be welded on to suit dudgeons already in a post.


Calving/Lambing Trailer

Calving or lambing trailer with a cage that does not come off. Rear gate that swings in and out. All new parts. 1 7/8 tow coupling.


Cattleyards Steel Rails Fitted To Wooden Posts

Sick of replacing or repairing wooden rails in your cattle yards after they have been used.This auction is to fit 115 mm by 42 mm oval cattle rail to wooden posts in a existing set of cattle yards. The rails come in 6 metres lengths, so this auction is for 5 rails, 6 metres long fitted to existing posts, at 1200 mm centres. This will do a 6 metre long section, but can do longer or shorter to suit your yards. GST Included. Check my other pages to see other stock handling equipment I make.


Weighing Platform

Weighing platform for weighing horses. It is 1220 mm wide by 2400 mm long. Horse weight. Made to order. Galvanised with 10 mm rubber mat on top. This auction is for the platform only, but can supply Tru Test load bars and indicator as well. Enquire for price and delivery time. Can arrange freight to a transport depot.
 
Tandem Axle Flat Deck Trailer With Cattle Ramp

Tandem axle flat deck trailer with cattle ramp. Walk way on both sides. Gate at top for truck driver to get in and out of and also stops cattle coming up behind truck driver. Four wind down legs to support trailer while loading. Removable draw bar so there is nothing sticking out to hit truck and trailers when they back up to the ramp. Rear section of ramp drops to the ground for the cows to walk up. A set of portable yards can be carted on the side of the trailer to create a pen for loading or unloading. This price is for the ramp/trailer, but can supply portable yards to go with this loading ramp. Sample photo. Built to order. Please enquire about delivery times and other options and price.
Providing a new perspective to an old problem

Copyright Richard Miles Engineering - All rights reserved
Website designed and maintained by: dsh Design
Contact:
Richard Miles
027 221 1219
Back to content